Advertisement
PAGE 2
2
Dimensions
Dimensions vary according to how the AS or AL is mounted. The AS and AL share some common
dimensions. Refer to Table 3 and the drawings shown in Figure 2 to determine correct dimensions.
Parameter
(No mounting tabs and no DIN Rail Clip)
(Includes mounting tabs when mounting in
back of a panel))
(Includes DIN Rail Mounting Clip)
No part of this publication may be reproduced without the prior agreement and written permission of Horner APG, Inc.
Information in this document is subject to change without notice.
.
02 AUG 2006
Table 3 – Dimensions for AS / AL
Height
Width
Width
Width
Length
Length
AS
AS / AL
Figure 2 – Dimensions
Drawing
AS / AL
AS / AL
(Note: Shown only in
AS drawing, but it
applies to AS / AL
units.)
AS / AL
AS / AL
(Note: Dimension
not shown.)
AS
AL
AL
MAN0814-01
Value
2.46 in (62.5 mm)
3.54 in (90 mm)
4.17 in (106 mm)
3.86 in (98 mm)
2.80 in (71 mm)
4.96 in (126 mm)
Advertisement
