Download
Share
Print this page
Schroeder America PEPSI 959 Installation Instruction, Parts List And Configuration Manual
  1. Manuals
  2. Brands
  3. Schroeder America Manuals
  4. Dispenser
  5. PEPSI 959
  6. Installation instruction, parts list and configuration manual

Schroeder America PEPSI 959 Installation Instruction, Parts List And Configuration Manual

4 flavor electric dispenser
Hide thumbs

Advertisement

Quick Links

Download this manual
PEPSI
®
The information contained in this document is subject to change without notice.
SCHROEDER AMERICA MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SCHROEDER AMERICA shall not be liable for errors contained herein or for incidental consequential
damages in connection with the finishings, performance, or use of this material.
This document contains proprietary information which is protected by copyright. All right reserved.
This manual must be read and understood before the installation and operation of this dispenser.
PATENT NUMBERS: PATENT PENDING US & FOREIGN
INSTALLATION INSTRUCTION, PARTS LIST
AND CONFIGURATION GUIDE
4 FLAVOR ELECTRIC DISPENSER
Dispenser Model No. 959
© Copyright 2015 by Schroeder America, all rights reserved.
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
5620 Business Park • San Antonio, TX 78218
210.662.8200 • Fax: 210.667.2600 • www.schroederamerica.com
Toll-Free 877.404.2488
Please refer to the Schroeder America website (www.schroederamerica.com)
for information relating to Schroeder America installation and Service
Manuals, Instruction Sheets, Technical Bulletins, Service Bulletins, etc.
FOR THE
NOTICE:
Schroeder America
3158001
Rev: 8/16
PN: 805-0028

Advertisement

loading
Need help?

Need help?

Do you have a question about the PEPSI 959 and is the answer not in the manual?

Questions and answers

Related Manuals for Schroeder America PEPSI 959

Summary of Contents for Schroeder America PEPSI 959

  • Page 1 BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SCHROEDER AMERICA shall not be liable for errors contained herein or for incidental consequential damages in connection with the finishings, performance, or use of this material.

  • Page 2: Installation

    1. DISPENSER DIMENSIONS AND WEIGHT A. Four Flavor Electric Dispenser weight is 13.5 lb. B. Four Flavor Electric Dispenser shipping weight is 15 lb. C. Four Flavor Electric Dispenser shipping dimensions 9” x 22 3/8” x 24 5/8” 16.259 17.696 13.823 15.014 3.276...
  • Page 3 2. If the dispenser will be mounted to the countertop, use fastener kit (P.N. 670-0013) containing the following parts: BOLT • (4 each) Bolt, 10-24 INNER BRACKET • (4 each) Spacer SPACER • (8 each) Nut, Hex, 10-24 WASHER • (4 each) Washer, Flat a.
  • Page 4 4. Check for leaks. 4. RATIO/BRIX The Schroeder America Dispenser has been thoroughly tested and sanitized prior to shipment. The installer will be required to ratio/brix the dispenser. NOTE: Water valve has been pre-set and capped to flow at 2.0 oz/s (finished drink).
  • Page 5 Decrease flow turn counterclockwise 5. CLEANING AND SANITIZING The Schroeder America Dispenser is shipped from the factory cleaned and sanitized in accordance with NSF guidelines. The dispenser must also be cleaned and sanitized after installation is complete. It is recommended that the operator provide continuous maintenance as required by the manual and/or state and local guidelines to ensure proper operation.
  • Page 6 IMPORTANT ONLY USE INTERNAL CLEANING SOLUTIONS THAT ARE APPROVED FOR BEVERAGE DISPENSER APPLICATIONS, SUCH AS BevClean™. (NO CAUSTIC CHEMICALS SUCH AS INDUSTRIAL KITCHEN CLEANING CHEMICALS SHOULD EVER BE USED) C. External Cleaning: The stainless steel dispenser can be cleaned by wiping with a cloth soaked with warm cleansing detergent.
  • Page 7 F. Sanitizing Water Circuits: Cleaning and Sanitizing are not required for potable water circuits. The potable water lines should remain connected during the cleaning procedures for the concentrate circuits to avoid contamination. 1. Disconnect concentrate container from product line. 2. Attach product line to container containing sanitizing solution mixed to mfg. recommendations (100 ppm is recommended) a.

  • Page 8: Troubleshooting

    6. TROUBLE SHOOTING A. No water dispensed • Check water supply • Check Shut-off module knob (is it open) • Check ratio/brix adjustment • Line plugged B. No syrup dispensed • Check C0 pressure • Check for product (BIB) • Check Shut-off module knob •...
  • Page 9 7. TO REMOVE AND REPLACE THE MEMBRANE SWITCH ASSEMBLY (P.N. 602-0035) A. Remove the lid and back panel from unit. B. Disconnect the membrane switch from the PCB. (Fig. 7.1) C. Turn off Syrup and Water modules by rotating the yellow shut-off knobs counterclockwise. (Fig. 7.2) D.
  • Page 10 8. TO REMOVE AND REPLACE THE PCB (PRINTED CIRCUIT BOARD) (P.N. 600-0013) A. Remove the lid and back panel from unit. B. Disconnect the membrane switch and solenoid valves from the PCB. (Fig. 8.1 & 8.2) C. Insert flat head screw driver at outside edge of PCB and stand-off. (Fig. 8.3) WARNING DO NOT USE MAGNETIZED TOOLS.
  • Page 11 NOTES...

  • Page 12: Included Accessories

    INCLUDED ACCESSORIES GROMMET, CAN, BLACK, P.N. 265-0696 BLIND, TEA P.N. 210-0045 CUP REST DRIP TRAY P.N. 265-0550 P.N. 631-0132 FITTING ASSY. 1/2 DOLE X 1/4 BARB 1/4 BARB, W/ O-RINGS, P.N. 625-0059 STAINLESS STEEL FITTING P.N. 625-0004 1/4 90 DEG, BARB, W/ O-RINGS, FLOW CONDITIONER NOZZLE P.N.

  • Page 13: Optional Accessories

    OPTIONAL ACCESSORIES SHUT-OFF TOOL FLOW CONTROL TOOL P.N. 316-0005 P.N. 316-0006 SEPARATOR NOZZLE ASSY, PLUGGED, P.N. 316-0004 SANITIZING, 4FLVR TWR P.N. 631-0187 Mounting Template Bolt Spacer Washer Nuts KIT, COUNTER MOUNT INSTALL, SCREWS P.N. 670-0013...
  • Page 14 SYRUP & WATER VALVES Water Syrup 1 Syrup 2 Syrup 3 Syrup 4...
  • Page 15 SHUT-OFF ASSEMBLY Item Schroeder PN Description SCREW,8-16x.375, 224-0002 PLASTITE,PHSL,PHD BRACKET,SHUTOFF,4FL,ELECT SCREW,8-32 X 3/8”, PHILLIPS,TRUSS HEAD, SS,BLACK OXIDE ASSY,SHUTOFF, 637-0014 DOUBLE 3/8 DOLE,BLACK Assy 637-0014 O-RING,2-110 SCREW,8-16x.375, Assy 637-0014 PLASTITE,PHSL,PHD Assy 637-0014 RETAINER,STEM Assy 637-0014 WASHER,STEM Assy 637-0014 STEM,BODY,BG 265-0063 RETAINER,CLIP,FITTING Assy 637-0014 BODY,SHUT-OFF,BG/VLV,BLACK...
  • Page 16 ASSEMBLY * Item 24 (P.N. 210-0045 ) can be cut to route syrup & water inlet tubing through rear of unit ** Kit Assembly Item 29 Not Included (optional accessory)
  • Page 17 ASSEMBLY Item Schroeder PN Description 265-0696 COVER,TOP,4F,ELECTRIC TOWER 675-0162 KIT, TUBE ASSYS, VALVE TO NOZZLE, DIFFUSER PLATE, W/SCREWS TUBE ASSY, VALVE TO NOZZLE, WATER,4FE, 13.5” LONG, W/NOZZLE Assy 675-0162 ADAPTER RETAINER Assy 675-0162 TUBE ASSY, VALVE TO NOZZLE,SYRUP,4FE, 12.0” LONG Assy 675-0162 TUBE ASSY, VALVE TO NOZZLE,9”...
  • Page 18 SYRUP & WATER VALVE ASSEMBLY...
  • Page 19 SYRUP & WATER VALVE ASSEMBLY Item Schroeder PN Description Both Assys 638-0019 & 638-0008 CLIP,RETAINER,SOLENOID, VLV VALVE BRACKET, BOARD MOUNT ASSY 638-0019 VALVE ASSY, SFCV, SODA/WATER, 2.0 OZ/S Both Assys 638-0019 & 638-0008 O-RING,2-009 Both Assys 638-0019 & 638-0008 O-RING,2-012 Both Assys 638-0019 &...