Technical Data - Viessmann 6333 Manual

1.3 Checking the package contents
Check the contents of the package for completeness:
- Floodlight spot with connection cables, resistor and diode
- Manual
2. Introduction
This LED model uses SMD LEDs to produce light matching the
lamp model. Low heat build-up and power input. Nearly unlim-
ited lifetime of the LEDs, so no more change is required.
3. Mounting
- Remove the spot carefully from the package.
- Check the function before mounting.
- Drill a hole (Ø 2 mm) at the mounting place (see fig. 1).
- Put the cables from outside through the hole and fix the
bracket, e. g. with a commercial glue.
4. Connection
Caution:
Resistor and diode at the cables are needed for proper
function of the LED model. Never cut them off! Never cover
resistor or diode with insulation material, because they have
to be cooled by surrounding air!
While connecting the cables, leave a loop of about 2 – 3 cm
length below the LED model, so that you can pull and reverse
the LED model from the mounting hole in any work.
DC voltage: Connect the diode (red part with black marking) with
the positive pole and the resistor with the negative pole of the power
supply.
AC voltage: Operation with AC voltage could cause some flickering.
We recommend to use the Viessmann power module, item 5215,
which is sufficient for approx. 100 LED lamps or reflectors (fig. 4).
Connect the cable with the diode to the brown output socket and the
cable with the resistor to the red output socket.
5. Warranty
Each model is tested to its full functionality prior to delivery. The
warranty period is 2 years starting from the date of purchase.
Should a fault occur during this period please contact our
service department (service@viessmann-modell.com). Please
send the item to the Viessmann service department for check-
ing and repair only after consultation. If we find a material or
production fault to be the cause of the failure the item will be
repaired free of charge or replaced. Expressively excluded from
any warranty claims and liability are damages of the item and
consequential damages due to inappropriate handling, disre-
garding the instructions of this manual, inappropriate use of the
model, unauthorized disassembling, construction modifications
and use of force, overheating and similar.

6. Technical data

Operating voltage:
Operating current:
Änderungen vorbehalten. Keine Haftung für Druckfehler und Irrtümer.
Die aktuelle Version der Anleitung finden Sie auf der Viessmann Homepage
unter der Artikelnummer.
Subject to change without prior notice. No liability for mistakes and printing
errors.
You will find the latest version of the manual on the Viessmann website using
the item number.
4
(with and without item 5215 power modul)
Entsorgen Sie dieses Produkt nicht über den (unsortierten)
Hausmüll, sondern führen Sie es der Wiederverwertung zu.
Do not dispose of this product through (unsorted) domestic
waste, supply it to recycling instead.
Viessmann
Bahnhofstraße 2a
D - 35116 Hatzfeld-Reddighausen
info@viessmann-modell.com
www.viessmann-modell.de
13 – 24 V digital signal
Modelltechnik GmbH
10 – 16 V AC ~
14 – 24 V DC =
ca. 10 mA
Made in Europe
Stand 03/sw
12/2019
92357
Ho/Kf