La Marzocco Strada MP Manual page 6

and authorized professional to
perform any repair. Any repairs
must be performed exclusively
by the manufacturer or by
an authorized centre using
only original parts.
compliance with the above
could compromise the safe
operation of the machine.
16) You should plan to make use
of an omnipolar connector during
installation, as required by local,
national, and international electrical
codes and regulations.
17) In order to avoid dangerous
overheating problems, it is
recommended that the power
supply cable be fully unfurled.
6
18) Do not obstruct air intake
and exhaust grilles and, in
particular, do not cover the
cup warmer tray with cloths or
other items.
Non
19) The machine's power
supply cable must not be
replaced by users. In case the
power supply cable becomes
damaged, shut
machine and disconnect the
machine from the electctrical
network by switching off the
relative circuit breaker
close off the water supply;
to replace the power supply
cord, contact
professionals exclusively.
20) Common Dimensions, Weights,
and Features
A
STRADA MP
A [mm]
B [mm]
off the
C [mm]
WEIGHT [kg]
and
qualified
B
C
2 groups 3 groups
800 1000
675 675
475
475
70 91