Related Manuals for Jaypro Sports FSG-1
Summary of Contents for Jaypro Sports FSG-1
-
Page 1: Installation Instructions
-- FSG-1 -- Installation Instructions Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Page 1 of 5... - Page 2 FSG-1 PARTS LIST (QTY: SINGLE UNIT) ITEM IMAGE DESCRIPTION 73 3/4" LONG UPRIGHT FSG-1-A1 34 9/16" LONG BASE FSG-1-A2 BACKSTAY 1.90 DIA FSG-BS1 116 1/8" LONG CROSSBAR FSG67910-5 Classic Cast Corner - Machined SG-L Bottom RCG Cast Corner - Machined...
- Page 3 3) USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE HAZARDOUS. 4) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR REPLACEMENT, CONTACT YOUR DEALER OR JAYPRO SPORTS. Tools Require: Rubber Mallet 9/16" Socket Wrench or Box Wrench 7/32"...
- Page 4 ASSEMBLY (REQUIRES 2 PEOPLE): 1) Unpack all parts and check against parts list to ensure that all parts have been included. 2) Inspect for damage. Report all damages to trucking company. 3) Lay parts out on clean dry floor. 4) Assemble both side frames, as shown in Figure 1 (note the orientation of the safety labels).
- Page 5 6) Loosely install all hardware. Ensure goal is square and corners fully inserted and then tighten hardware. 7) Drape the net over the goal and secure net to the extrusion using the net clips. Note the top corner of net has a label. 8) To minimize the amount of sag across the back of the net, tie off the cord that passes across the back corner of the net to the backstays.