Philips FC9306 User Manual page 12

English
12
Before replacing/emtying the dustbag
In some cases, the dustbag full indicator can indicate that the dustbag is
full, even though it is not. This may occur if the pores of the dustbag are
clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement
dust and similar substances) or if something is blocking the nozzle, tube
and/or hose. If the pores of the dustbag are clogged, you have to replace
the disposable dustbag or empty the reusable dustbag, even if it is not full
yet. If the dustbag is not clogged but not full either, something is blocking
the nozzle, tube and/or hose. In this case, do not replace the dustbag
but remove the obstruction.
replacing the disposable dustbag
- Replace the dustbag as soon as the dustbag-full indicator has changed
colour permanently, i.e. even when the nozzle is not placed on the
floor.
1 Pull the cover upwards to open it.
2 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.
3 Pull at the cardboard tag to remove the full dustbag from the holder.
When you do this, the dustbag is sealed automatically.
,