Samsung AE040JXEDEH Service Manual page 15

No Parts
4 Expansion Vessle
5 Plate Heat
Exchanger
Samsung Electronics
Procedure
1) Remove the tube of the expansion vessel
and the backup heater by adjustable wrench.
(Use adjustable wrench-150kgf·cm)
Use the Torque Wrench when you
assemble it.
2) Remove 2 screws. (Use + Screw Driver)
3) After removing the nut. Pull the bracket out.
4) Pull the expansion vessel up, out.
1) Remove 4 insulations.
Disassembly and Reassembly
Remark
17