Hydro Unit - Samsung AE040JXEDEH Service Manual

3-1 Hydro Unit

 AEN160YD ∗ /AEN080YD ∗
Be sure that the power switch is in the OFF and the power source cord shall be unplugged prior to disassembly and reassembly works.
No Parts
1 Panel
2 Controller
&
Manometer
Samsung Electronics
Procedure
1) Remove 4 cover screws from the Hydro Unit.
(Use + Screw Driver)
1) Remove 3 screws from it.
(Use + Screw Driver)
2) Remove pressure sensor by adjustable wrench.
(Use adjustable wrench-230kgf·cm)
3) Pull the manometer out.
4) Push the 2 hooks of cover.
5) Pull the bottom of remocon body up.
Remark
13