USER MANUAL INDEX USER MANUAL Product Description Applicance Control Panel First Time Use (Salt, Rinse Aid and Detergent) Programs Table Programs Description Options and Functions Loading the Racks Daily Use Advice and Tips Care and Maintenance Cleaning the lter assembly Cleaning the spray arms Cleaning the water inlet hose Troubleshooting...
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.whirlpool.com.hk Before using the appliance carefully read Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE Upper rack Upper rack height adjuster...
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER After installation, remove the stoppers from the racks and the reta- Rinse aid makes dish DRYING easier. The rinse aid dispenser A should ining elastic elements from the upper rack.
PROGRAMS TABLE Default Detergent Water Energy Duration container Available of wash Program consumption consumption options program (litres/cycle) (kWh/cycle) (h:min) 50° 4:00 11.5 0.83 Intensive 65° 2:30 15.0 1.50 Normal 55° 2:30 15.0 1.30 Rapid 30’ 50° 0:30 0.50 Pre-Wash 0:10 0.01 ECO program data is measured under laboratory conditions according to European Standard EN 50242.
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled. DELAY TABLET (Tab) It is possible to delay the start time of the program by 2, 4 or...
LOADING THE RACKS UPPER RACK LOWER RACK For pots, lids, plates, salad bowls, Load delicate and light dishes: cutlery etc... Large plates and lids should glasses, cups, saucers, low salad ideally be placed at the sides to avoid bowls. interferences with the spray arm. (loading example for the upper rack) (loading example for the lower rack) ADJUSTING THE HEIGHT OF THE UPPER...
DAILY USE 1. CHECK WATER CONNECTION MODIFYING A RUNNING PROGRAM Check that the dishwasher is connected to the water supply If a wrong program was selected, it is possible to change it, provided and that the top is open. that it has only just begun: press and hold the ON/OFF button, the machine will switch o .
CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the lter assembly so that the lters do not clog On occasions, food residue may become encrusted onto the and that the waste water ows away correctly. spray arms and block the holes used to spray the water.
• After-Sales Service; phone number see in warranty booklet. plate attached to the left or right side inside the • Download from website: www.whirlpool.com.hk door of the dishwasher. The phone number is listed in the warranty booklet or on the website: www.whirlpool.com.hk...
HEALTH & SAFETY GUIDE IMPORTANT TO BE READ AND OBSERVED immediately with the machine empty, to avoid corrosion damage to internal parts. Store the detergent, rinse aid and Before using the appliance, read these safety instructions. Keep salt out of reach of children. Shut o the water supply and them nearby for future reference.
Page 13
ELECTRICAL WARNINGS DISPOSAL OF PACKAGING MATERIALS The rating plate is on the edge of the dishwasher door (visible The packaging material is 100% recyclable and is marked with when the door is open). the recycle symbol . The various parts of the packaging must therefore be disposed of responsibly and in full It must be possible to disconnect the appliance from the compliance with local authority regulations governing waste...