Backrest Assembly; Seat Pad Assembly - Chicco Stack 1 Owner's Manual

Backrest Assembly

WARNING
Avoid falls. Never use in high chair mode without backrest attached.
5
A
SLOT
OPENING
5
B
10
5A. To attach the Backrest to
the Seat Base insert one side of
the Backrest into the slot and
opening on the inside of the
Base.
You may need to squeeze the
recline handle on the back of
the Backrest when inserting
the Backrest into the slot and
opening.
5B. Pull the waist straps up out
of the way and then pull back
on the Backrest until the other
side snaps into place.
Make sure the Backrest is
attached securely by pulling up
on both sides of the Backrest.

Seat Pad Assembly

6
6. Attach the Seat Pad and
thread the Harness Straps
through the corresponding slots
on the Seat Pad.
Attach both of the Shoulder
Pads to the Shoulder Straps as
shown.
11