Setting Jumpers & Connectors; At/Atx Mode Selector (Sw1); Signal Description -At/Atx Mode Selection - BCM ESM-APLM User Manual

2.3 Setting Jumpers & Connectors
2.3.1

AT/ATX mode selector (SW1)

*Default
2.3.1.1 Signal Description –AT/ATX mode selection
AT/ATX mode
AT mode
ATX mode
ESM-APLM User's Manual
AT mode*
Description
Auto-power on, no need to press Power button to
enable power on/off
Press the power button to enable power on/off
ESM-APLM User's Manual 17
AT/ATX mode
ATX mode