Advertisement
Power on handheld unit
: Press the power button
Power off handheld unit
: Press the power button
Effective data communication range
To achieve longer communication range, avoids concrete, wall and metallic
between the barcode scanner and the base unit. Obstacle between the barcode scanner
and the base unit would decrease the communication severely. Test result is up to 200
meters for free space data communication range under the condition of clear weather,
temperature at 27℃,
visibility
of 5 kilometers.
Visual and audio indication of handheld unit for RF transmission
Successful Transmission
Audio (Beeper)
Yes
No
Three beeps
RF communication as clusters
Cluster 1
Default setting of handheld unit
Firmware version of handheld unit
on handheld unit for two seconds.
on handheld unit for two seconds.
Red LED on handheld unit
None
Off
On
Cluster 2
Default setting of base unit
Firmware version of base unit
Note: 1. See "CS-I series User Manual" for more information. 2. For better readability, please print this document with laser printer. 3. Version: 1.1.9.
RF communication setting for handheld unit
Handheld unit RF channel No.
storage racks
Frequency hopping
Note: 1) The factory default settings are indicated with asterisks (*); 2) Do change the
settings if multiple handheld units and base units are deployed in the same effective range.
Configuration example
A handheld unit is configured with channel 2, ID 15.
Configuration alphanumeric entry barcode
0
1
2
RF communication setting for base unit
Refer to
"Remote Scanner Management User
Option barcode
Option
01-08
Handheld unit ID
01-16
RF power level
10dbm to -15dbm
Disable
Enable
1) Scan "%SETUP"
2) Scan "0701"
3) Scan "0"
4) Scan "2"
5) Scan "%%%END"
3
4
Manual".
SETUP
Alpha. entry
01-08
06*
01-16
01*
01-07
01*
00
01*
END
6) Scan "%SETUP"
7) Scan "0702"
8) Scan "1"
9) Scan "5"
10)Scan "%%%END"
5
8
6
9
7
Advertisement
