Hardware Overview - D-Link Mydlink DSP-W215 Quick Install Manual

ON/OFF Button
WPS/Reset Button
Outlet
WPS/Reset Button
ON/OFF Button
Status LED
Power LED
Outlet

Hardware Overview

Front View
WPS
Reset
Press to turn the device connected to the DSP-W215 ON or OFF.
Solid Green
Blinking Green
Blinking Orange
Solid Red
Off
Solid Green
Off
Connect your appliances, lamps, and other electronic devices you
wish to monitor.
Press for one second to start the WPS
connection process. The Status LED will start
to blink green.
Press and hold until the Status LED turns
red in order to reset the device back to
the factory default settings
seconds).
The Smart Plug is successfully connected to
your network.
The WPS process is in progress.
The Smart Plug is not properly connected
with your wireless network.
The Smart Plug is powering on, attempting
to reset, or the device is defective.
If the Smart Plug will not power on, try
plugging the Smart Plug into another outlet.
The electronic device you plugged into your
Smart Plug is powered on.
The device you plugged into your Smart Plug
is turned off or not receiving power.
4
Status LED
Power LED
(for about 10