Table of Contents
Advertisement
4 Maintenance
Shipping
Shipping
the Unit
the Unit
The original shipping carton and packing materi-
als can come in handy. For maximum protection,
re-pack the unit as it was originally packed at the
factory if you need to ship it.
T
roubleshooting
T
roubleshooting
Symptom
• The power cord is disconnected.
No power.
• The power of the external source
No sound.
equipment is switched off.
• No disc or tape is inserted.
The unit does not
start playback.
• An unplayable disc or tape is inserted.
• The disc is placed upside down.
• The disc is not placed within the guide.
• The disc is dirty.
• The remote control is not pointed at the
The remote
remote sensor of the unit.
control does not
work properly.
• The remote control is too far from the
unit.
• There is an obstacle in the path of the
remote control and the unit.
• The batteries in the remote
control are exhausted.
14
Cleaning
Cleaning
Use a soft, dry cloth when cleaning the player. If
the surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Never use strong solvents, such as alcohol, ben-
zine, or paint thinner. These might damage the
surface of the unit.
Do not use volatile liquids, such as insecticide
spray, near the unit. Do not leave rubber or plas-
tic products in contact with the unit for a long
period of time. They will leave marks on the sur-
face.
Cause
• Plug the power cord into the wall
• Switch on the external source
• Insert a disc or tape.
• Insert a playable disc or tape.
• Place the disc with the playback side
• Place the disc on the disc tray
• Clean the disc.
• Point the remote control at the
• Operate the remote control
• Remove the obstacle.
• Replace the batteries with new ones.
the Unit
the Unit
Correction
outlet securely.
equipment.
down.
correctly inside the guide.
remote sensor of the unit.
within about 23 ft (7 m).
Advertisement
Table of Contents
