11. Wall mount
Mounting on the wall
Please ensure that the surface on which you intend to attach the mount is even, clean,
grease-free and dry.
Remove the adhesive film on the back of the mount.
➔
Press mount firmly on the desired place.
➔
12. Technical data
Marking
13. What to do if...
...the Audiotherm does not initialise.
The optical window of the Audiotherm and/or the Visiotherm / Visiotherm S / Visiotherm E is
probably dirty or covered with a film of water.
Clean the optical window of the Audiotherm and the Visiotherm / Visiotherm S / Visiotherm E.
➔
... a network link cannot be established between the Audiotherm and Navigenio.
Check whether you have proceeded correctly:
➔
Set the control dial on Navigenio to setting "A".
➔
Switch the Audiotherm on and put it in place.
➔
To initialise the Audiotherm, turn until the required symbol appears.
➔
...the network link is interrupted during controlled cooking.
Turn the control dial of the Navigenio to "0" and then back to "A".
➔
Switch the Audiotherm on and put it in place.
➔
To re-initialise the Audiotherm, turn until the desired symbol appears.
➔
31