Planned Cooking - AMC Audiotherm Plus User Manual

Table of Contents

Advertisement

When the cooking time has expired:
A single, repetitive beep
ƒ
The Navigenio switches to the 60°C keep
ƒ
warm function.
The Audiotherm flashes alternately "60°C"
ƒ
and "0:00".
6
Switch off beep.
Use the keep warm function (active for
1 hour) as required.
After the end of the keep warm function:
The Navigenio switches off.
ƒ
The blue indicator lamp and the display of
ƒ
the Audiotherm switch off.
Then (or immediately after the end of cooking
if the keep warm function is not to be used):
Set the control dial on the Navigenio to „0".
The residual heat indicator flashes red.
ƒ
Remove the Audiotherm and switch off.
9.4

Planned cooking

During controlled cooking with the Navigenio at „A", the Audiotherm can be set so that the heating of
the Navigenio switches on at a later time (planned start).
A planned start is possible for controlled cooking without the addition of water, for cooking with the
addition of liquid, heating to 60°C, for quick cooking with Secuquick softline or steaming with
EasyQuick, i.e. with Visiotherm, Visiotherm E and Visiotherm S.
Do not use any perishable foodstuffs (raw meat, raw fish and dairy
ƒ
products) for the "planned start" function.
Ensure that a pot or pan is always on the Navigenio.
ƒ
Ensure that no other objects (e.g. towels or paper), or living creatures are
ƒ
on the Navigenio.
Ensure that the chosen lid is always placed and closed correctly.
ƒ
28
sounds.
7
8
9
9
7
9
0
6
8

Advertisement

Table of Contents
loading

Table of Contents