FWB multiBALL Setup Manual page 5

Step 2
Mount Frames
Please make sure all profiles are perfectly horizontal/vertical
3
2
1
Mount profiles to the wall
1 bottom - fix all screws and we advice to keep the distance of
about 5cm only or less from the floor for the ease of handling.
2 sides - only fix the top screw for each profile to hold it in place
3 top - try if the distance to the sides is correct and the top fits
- then fix all top screws and last the remaining screws for the sides
Bolts, dowels and washers are not included, due to different
wall types. Please organize them yourself. There are 20 holes
with a diameter of 8mm for the attachment.
Max. 5cm