Hardware Specifications - H3C LSWM1FW10 User Manual

Table 2-2 Management Ethernet port specifications
Item
Connector type
Transmission rate
Transmission medium and
maximum transmission distance
Services

Hardware Specifications

Table 2-3 OAP card hardware specifications
Item
CPU
Memory
Number of CF
card
interfaces on
an OAP card
and the
supported
specifications
RJ-45
10/100/1000 Mbps, half/full duplex
Category-5 twisted pair cable that supports a maximum
transmission distance of 100 m (328.08 ft.)
Upgrade of host software and BootWare, network management.
Specification
MIPS, eight cores, 1 GHz
2 GB
Provides one CF
interface and one 1 GB CF
card when shipped.
Supports a CF card with a
maximum capacity of 1 GB.
Specification
—
Avoid replacing the memory by yourself to
prevent damage to the OAP card.
To replace a CF card, make sure that the new
card
CF card can accommodate the software to be
loaded.
For how to load and upgrade software version
of the OAP card, refer to the related manual in
the CD-ROM delivered with the OAP card.
2-3
Remarks