Hardware Of The Oap Card; Appearance; Front Panel; Description Of The Leds - H3C LSWM1FW10 User Manual

2

Hardware of the OAP Card

The firewall card, IPS card and access controller module are similar in hardware structure and
appearance, except that the product model marked on the front panel and the loaded software of the
cards are different. The following hardware introduction is made on a firewall card.

Appearance

Figure 2-1 OAP card appearance
(1) Ejector lever

Front Panel

Appearance
Figure 2-2 Front panel of an OAP card
(1) CF card interface
(3) CF card status LED (CFS)
(5) System status LED (RUN)

Description of the LEDs

The front panel of an OAP card provides four LEDs, namely PWR, RUN, CFS and Management. Refer
to Table 2-1 for description of the LEDs.
(2) Fastening screw (captive screw)
(2) Management Ethernet port
(4) Management Ethernet port status LED (Management)
(6) PWR LED
2-1
(3) Front panel of the OAP card