Dst Settings - Bascom RECORDER User Manual

User Manual
Check to enable the NTP, and select a Server Address, click Update Now to manually sync the date &
time.
Click Apply to save your settings.
When NTP function is enabled, system will update the system time at 00:07:50 per day, or every time
when the system is starting up.

3.6.1.3 DST Settings

The DST (Daylight Saving Time) function allows you to select the amount of time that Daylight Saving
has increased by in your particular time zone or region.
Enable DST: If Daylight Saving applies to your time zone or region, check this option to enable.
Time Offset: Select the amount of time that Daylight Saving has increased by in your time zone. This
refers to the difference in minutes, between Coordinated Universal Time (UTC) and the local time.
Enable DST: You can select how Daylight Saving starts and ends:
Week: Select the month, a particular day and time when Daylight Saving starts and ends. For example,
2 a.m. on the first Sunday of a particular month.
Date: Select the start date (click the calendar icon), end date and time when Daylight Saving starts and
ends.
Start Time / End Time: Set the start time and end time for Daylight Saving.
37