Record Settings; General; Record Schedule - Bascom RECORDER User Manual

User Manual
3.2.2 Record
This menu allows you to configure the channel recording settings.

3.2.2.1 Record Settings

Enable: Check to enable recording this channel.
Stream: Choose the recording quality. If you choose Dualstream, the system will record in
both Mainstream & Substream.
Pre-Record: If this option is enabled, the system starts recording a few seconds before an
alarm event (motion detection for example) occurs. Use this option if your primary recording
type is motion or I/O alarm based.

3.2.2.2 Record Schedule

This menu allows you to specify when the system records and defines the recording mode for each
channel. The recording schedule lets you set up a schedule like, daily and hourly by normal
(continuous) recording, motion recording and I/O alarm recording. To set the recording mode, click
first on the mode radio button (Normal, Motion, IO), then drag the cursor to mark the slots. The
recording schedule is valid only for one channel. If you want to use the same recording schedule for
other channels, use Copy function. Click Apply to save your settings.
20