Gira eNet Operating Instructions page 2

eNet
Installation adapter Mini housing
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
Mounting a panel-mounted housing
eNet actuator or sensor is connected correctly.
o Engage the adapter (3) on the eNet universal transmitter or energy sensor.
o Insert the eNet device into the housing base (4) in such a way that the device can be
operated through the housing lid.
o Ensure strain relief (Figure 2).
To ensure secure strain relief, use a maximum of two cables of the same diameter.
Recommended cable for effective strain relief: H05VV-F 3G 1.5.
o Place the housing lid on the housing base and push them together.
32586002 10499296
Figure 2: Strain relief
20.01.2014 2/3