Advertisement
Quick Links
Wireless diagnostic unit
Wireless diagnostic unit
Order No. : 5304 00
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Keep button cells out of reach of children! If button cells are swallowed, get medical help
immediately.
Risk of explosion! Do not throw batteries into fire.
Risk of explosion! Do not recharge batteries.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
(1) LED display
(2) Button field
3 Function
Intended use
-
Indication of the radio signal quality in eNet installations
-
Indication of third-party radio in the area of an eNet installation
-
Switch-on, switch-off of the repeater function of suitable eNet devices
i Only with eNet Server Software up to version 1.4
i This device is unsuitable for testing the radio signal quality of the eNet server, as it cannot
detect all the telegrams of the eNet server.
i In systems with an eNet servers, we recommend checking the radio signal quality of the
eNet installations with the eNet server.
32587112
10865125
Figure 1: Front view
29.03.2017
1/5
Advertisement
Related Manuals for Gira 5304 00
Summary of Contents for Gira 5304 00
- Page 1 Wireless diagnostic unit Wireless diagnostic unit Order No. : 5304 00 Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully.
- Page 2 Wireless diagnostic unit Product characteristics Indication of the signal quality of a selected eNet device using LEDs Display of the signal quality of status messages using LEDs Indication of radio signals of non-eNet radio transmitters in the 868.3 MHz frequency band using LEDs Switch-on, switch-off of the repeater functions of network-operated actuators, transmitters and energy sensors...
- Page 3 Wireless diagnostic unit Press the On button of Channel 2. The operating mode eNet Status is switched on. LED (1) of the diagnostics device displays the signal quality of the received eNet telegrams for approx. 3 seconds. Then, the LED turns red. i The display of the LEDs is updated on each newly-received telegram.
-
Page 4: Technical Data
Wireless diagnostic unit Press the Off button of Channel 4. LED (1) turns red for 3 seconds. Repeater function is switched off. i If the LED (1) remains off, no eNet device is in programming mode or in transmitting range. Exit the programming mode of the eNet device (see eNet device instructions). -
Page 5: Troubleshooting
Replace the battery with the same type (see Inserting battery). 5.3 Conformity Gira Giersiepen GmbH & Co. KG hereby declares that the radio system type Order No. 5304 00 corresponds to the directive 2014/53/EU. You can find the full article number on the device. The complete text of the EU Declaration of Conformity is available under the Internet address: www.gira.de/konformitaet...