Installation; Transport And Handling; Unpacking; Directives - Veco CLIMMA CWS DC INVERTER Series Installation, Usage And Maintenance Manual

DC50: The Climma DC chiller is designed for boats that require a load up to 50.000 Btu/h, which means
that in standard conditions, it is suited for motor boat from 50' up to 65' (15-20 meters) and sailing boats
between 60' and 70' (18-22 meters).

1.3. Installation

The unit must be installed by an authorized Climma service center and in compliance with the
instructions given in this manual.

1.4. Transport and handling

When loading or unloading the unit, use a fork lift equipped with forks at least 2/3 the length of the
shipping base.
Use an overhead lift if the unit is equipped with lifting eye-bolts.
Select lifting equipment suited to the weight and overall dimensions of the packaged unit or
components.
Take every precaution to prevent damage, when handling the unit or components keeping in
compliance with the information given on the packaging material.

1.5. Unpacking

Remove all cardboard, wood or other materials from the wood base. Lift the unit or components by
suitable means (e.g. lift truck), remove the wood base, then set the unit or components into position.
Once all packing material has been removed, check that the unit has not been damaged in any way.
Caution: Wear protective gloves when handling any packing materials and the wood base. Dispose of all
packaging materials appropriately in accordance to local codes.

1.6. Directives

Climma DC chillers respect the following directives.

CE

Low voltage: 2006/95/EC

Electromagnetic Compatibility: 2004/108/EC

Machinery Directive: 2006/42/CE

Manufacturing quality Standards UNI EN ISO 9001:2008

1.7. General safety

Injuries or accidents caused by failure to comply with the recommendations of this manual are solely the
responsibility of the unit operator.
Basic Rules for Safe Operation:

do not touch the unit with moist or wet hands or feet;

never operate the unit while barefoot;

before installation and maintenance operations, disconnect the unit from the power supply.
failure to comply may result in injury or death;

installation and maintenance of this system can be hazardous due to system working pressure
and electrical components. Only a Climma certified service center should install and maintain the
system;

to minimize the hazard of electrical shock and personal injury, this component must be
effectively grounded;

during installation and maintenance follow safety codes, wear safety glasses and work gloves;
Veco S Installation Manual –Page 4 / 20