Advertisement
Quick Links
Part # 11059121 -
1958-1964 GM B-Body Slave Cylinder Bracket Kit
Table of contents
Page 2......... Included components and Hardware List
Page 3......... SwayBar Installation
THIS KIT IS DESIGNED TO BE USED WITH THE STREETGRIP SWAYBAR KIT (11059120).
Installation
Instructions
1958-1964 B-Body Slave Cylinder Bracket Kit
1
Recommended Tools
812-482-2932
Advertisement
Related Manuals for Ridetech 11059121
Summary of Contents for Ridetech 11059121
- Page 1 Installation Instructions Part # 11059121 - 1958-1964 B-Body Slave Cylinder Bracket Kit Recommended Tools 1958-1964 GM B-Body Slave Cylinder Bracket Kit Installation Instructions Table of contents Page 2..Included components and Hardware List Page 3..SwayBar Installation THIS KIT IS DESIGNED TO BE USED WITH THE STREETGRIP SWAYBAR KIT (11059120).
-
Page 2: Installation Instructions
Cylinder bracket over the end of the swaybar with the mounting holes to the OUTSIDE of the car. Position the bracket in the area it will be mounted. Open up the Poly SwayBar Bushings and install them over the Delrin Sleeves. www.ridetech.com... - Page 3 Installation Instructions SwayBar Installation 3. Install the bushing strap onto the bushing with the NARROW side to the outside of the frame. Install a 5/16” fl atwasher and 5/16” nylok on each bolt sticking through the bush- ing strap and slave cylinder bracket. There should be 2 bolts sticking through the slave cylinder bracket and 2 bolts sticking through both the slave cylinder bracket and bushing...
Need help?
Do you have a question about the 11059121 and is the answer not in the manual?
Questions and answers