FCC INFORMATION This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAFETY PRECAUTIONS 1. Do not modify the three-prong grounding type monitor power plug in any way. 2. Operate this unit only from the type of power source indicated on the label. 3. Do not block or cover ventilation openings on the back or bottom of the monitor cabinet. 4.
1. Scope This specification is used to define the performance of ADE-132W1 & ADE-142W1 series color LED monitor. This system also supports both video input and PC input. In video input mode, the system can automatically detect the NTSC signal and PAL signal. In PC mode, this system can support up to 1920 x 1080 VESA standard.
Page 6
2.5 Environmental Temperature Operating: 0 C to +40 C; 32 F to 104 Storage: -20 C to +60 C; -4 F to 140 Humidity Operating: 10% to 85% (non-condensing) Storage: 10% to 95% (non-condensing) 2.6 EDID This series of displays support EDID, but does not support DDC2B function. 2.7 Connectors C D E F G A.
5. Press monitor’s power button to turn ON monitor power. (Use reverse sequence to teardown the monitor) 3. Controls and indicators ADE-132W1 & ADE-142W1 MONITOR A. “ ” Power button Press the button to turn ON or turn OFF the monitor.
Page 8
B. “ ” Source button Press the button to show source menu. Select from CVBS, S-Video, VGA and HDMI input signal. C. “ ” Menu button Press the button to show the OSD main menu. As a confirmation key during the OSD operation. D.
Page 9
Remote control Power: Power On or Off the monitor Mute: Mute the audio Key Lock: Lock and unlock push buttons Menu/ Left/ Right/ Up/ Down/ OK/ Exit: Monitor OSD control : Hot key for volume control Auto: VGA mode picture Adjust VIDEO: Select CVBS source S-VIDEO: Select S-Video source Info: Display Monitor source information...
4. OSD Menu Hot key : Quick adjust keys from front panel hot keys: VOLUME: Press button to select the function and press button to adjust the volume, then press MENU button to exit OSD menu. KEY LOCK:Press and hold MENU key for 6 sec. to enable key lock. KEY UN-LOCK:Press and hold MENU key for 6 sec.
Page 11
VGA & HDMI mode : OSD Menu structure: Use the Source button to select from CVBS, S-VIDEO, VGA or HDMI, the menu structure within each source varies, refer to sections below on how to set-up each option. VGA / HDMI mode: Press the Menu button to bring up the MAIN MENU Page.
Page 12
MAIN ADJUST: 1. Press button to select an icon 2. Press MENU button to select item 3. Press button to adjust the value 4. Press MENU button to return VIVID MODE:Select the VIVID MODE (0~3 and USER) USER, 0: TEXT, 1: PHOTO, 2: MOVIE, 3: GAME BRIGHTNESS:Adjust the brightness value CONTRAST:Adjust the contrast value VOLUME:Adjust the volume...
Page 13
COLOR ADJUST: Set the color temperature of the LCD monitor for the CIE coordinate 9300˚k or 6500˚k or USER MODE 1. Press button to select an icon 2. Press MENU button to select adjust item 3. Press button to adjust the value 4.
Page 14
IMAGE ADJUST (VGA ONLY): 1. Press button to select an icon 2. Press MENU button to select adjust item 3. Press button to adjust the value 4. Press MENU button to return AUTO ADJUST:Press MENU buttons to auto adjust the H. Position, V.
Page 15
LANGUAGE:Press MENU button to enter the sub-menu 1. Press button to select language 2. Press MENU button to enter SETUP MENU: 1. Press button to select an icon 2. Press MENU button to select adjust item 3. Press button to adjust the value 4.
Page 16
AUTO SHIFT:Adjust AUTO SHIFT ON/OFF OFF – No Function ON – Every one hour there will be one scan line from top to bottom ( Every 1 second down one scan line) to prevent panel image sticking Anti-Burn-in scan line EXIT:Press MENU button to return to the main menu RECALL:...
Page 17
Video mode (CVBS & S-Video) : Press the Menu button to bring up the MAIN MENU Page. The following page will appear. Press button to select an icon, then Press MENU button to change the values in the sub menu. MAIN ADJUST:(VIDEO &...
Page 18
VIVID MODE:Select the VIVID MODE (0~3 and USER) USER, 0: TEXT, 1: PHOTO, 2: MOVIE, 3: GAME BRIGHTNESS:Adjust the brightness value CONTRAST:Adjust the contrast value SHARPNESS:Adjust Image sharpness SATURATION:Adjust Image saturation TINT:adjust Image tint (NTSC only) VOLUME:Adjust the volume EXIT:Press MENU button to return to the main menu COLOR ADJUST:...
Page 19
SCAN SETTING: 1. Press MENU button to select the sub-menu 2. Press button to select Scan Setting state. 3. Press MENU button to return INFORMATION: Press MENU button to get the timing information LANGUAGE:Press MENU button to enter the sub-menu 1.
Page 20
SETUP MENU: 1. Press button to select an icon 2. Press MENU button to select adjust item 3. Press button to adjust the value 4. Press MENU button to return OSD TIMEOUT:Adjust the OSD Show time (5 ~120 sec) GREEN MODE:Off or On (5 min~10 min) OFF –...
5. Regulatory Agency 5.1 Safety Approvals This series design shall meet the standards of the following domestic and foreign agencies: CE LVD : EN60950 5.2 EMI/EMS Emission Approvals This series design shall meet following EMI/EMS specifications: FCC Compliance: FCC Rules and Regulations, Part 15, subpart B, Class B. CE COMPLIANCE: EN55022 class B, EN55024, EN50130-4...
7. Wall Mount Notes: ADE -132W1 VESA Hole:7.87 x 3.94 inch (200x100mm) To avoid interference with speaker area, please notice the dimension 8.22inch and 1.04inch as indicated in the drawing. ADE-142W1 VESA Hole:15.75 x 15.75 inch (400x400mm) To avoid interference with speaker area, please notice the dimension 2.18inch and 1.42inch as indicated in the drawing.
Need help?
Do you have a question about the ADE-132W1 and is the answer not in the manual?
Questions and answers