FIA POPnetserver 2000 User Manual page 16

S POP
ETTING UP THE NETSERVER
Single Client Cabling
FIA POPnetserver 2000 User's Guide
2000
The POPnetserver can also provide additional storage to a workstation
that's not part of a network.
If no network or hub is available, connect the included red crossover cable
between the Ethernet connector on the rear of the unit and the Ethernet
card on the workstation.
Connect the included power cord between the receptacle on the back of
the POPnetserver and a grounded, three-pronged outlet or power strip.
16