FIA POPnetserver 2000 User Manual page 11

S POP
ETTING UP THE NETSERVER
FIA POPnetserver 2000 User's Guide
2000
To mount your unit on a wall, you must first remove the rubber inserts
from POPnetserver's feet, as shown in the following figure:
Mount two #10 pan head screws on the desired wall 9.6 inches [244mm]
apart to correspond with the holes you revealed in the POPnetserver's feet.
Hang the system on the wall, connecting the power cord and cables just as
you would for any other type of placement.
11