Programme Chart - Proline PRO HP 8 Operating Instructions Manual

Heat pump dryer
Table of Contents

Advertisement

Available languages

Available languages

GB
To deactivate the anti-crease cycle, you can press
programme selection knob or open the door.
10.Switch off the appliance by pressing
11.Open the door and remove the laundry.
Careful! The drum inside could still be hot.
Check that all items have been removed from the drum. If items are
left in the dryer, they could be damaged by over drying when the
dryer is next used.
12.Clean the filters and empty the condenser water tank as described
in the section Cleaning and Maintenance.
.
To prevent unpleasant odours and better maintain the door seal,
keep the appliance door slightly open until the next drying cycle.
13.Disconnect the appliance from the mains socket if it is not in use
for long periods.

Programme chart

Please follow the recommended laundry load when you use the
assigned programme. The values in the table below are for information
purpose only.
8
60%
3.5
40%
37
, turn the
2
130
2.5
178
190
2.7
40
0.4
60
0.72
80
0.9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents