Advertisement
Set the General Settings
1
Note
The first time you activate your
Tap this button
iPronto, the System Settings will
instructions on the screen.
automatically appear.
When calibration has succeeded,
you hear a success sound.
2
Select your
timezone
from this
dropdown list.
3
Select
the desired
Time format
and
Date format
from
these dropdown
lists.
4
Select the box
that you want to
modify.
The text box is
7
Switch the System sounds on
highlighted.
or off.
System sounds are the
Use the + and –
sounds that you hear when
buttons to adjust
you tap a button on the touch
the time and the
screen, go to the System
date.
Settings, and so on.
iPronto is now ready for use
Use the buttons
on this
touchstrip
to access a
layout.
Set the Wireless Settings
and follow the
5
Use the + and
– buttons
to adjust
the brightness and
power off settings.
6
Select one
of
these three
options to adjust
the power on
settings.
This is the layout that contains
the EPG application.
When you tap and hold
this
View Control
the
EPG flipside
8
Check
whether the Service Set Identifier (SSID) corresponds
to the SSID of your Wireless Access Point (WAP).
By default, the iPronto displays the SSID of the nearest WAP it
can detect.
If needed, change the default name of the SSID in this box.
If encryption is
enabled in your
wireless network,
select the correct
encryption here.
If encryption is enabled in your wireless network, enter
your Encryption pass phrase here. The Encryption pass
phrase must be the identical to your WAP's Encryption
pass phrase.
The Encoding key text box is automatically filled in.
button,
appears.
Set the Network Settings
9
10
Select one
of these
Check
whether your home
Network Configuration
network or your Internet
options.
Service Provider uses a proxy.
When you have selected DHCP, these text boxes are
automatically filled in. When you have selected
Fixed IP, you have to fill these text boxes in manually.
Here you can check the
signal strength of your
iPronto.
The status tab gives
you an overview of all
the system settings.
To create a personal
name for your iPronto,
enter a name here.
If you use a Proxy, enter
your Proxy Port here.
If your Proxy uses Password
Authentication, select this option.
If your Proxy uses Password
Authentication, enter your
Username and Password here.
Advertisement
