Philips SBCRU1000/05 Getting Started Manual

More Information
You can find more information on getting the
iPronto up and running and using it:
• In the iPronto User Manual
that accompanies the iPronto.
• In iPronto Online Help
that you can access via the 'User Manual' link
in the iPronto Portal in layout 8.
• At http://www.pronto.philips.com.
Install the Wireless LAN Adapter
Open the Wireless LAN
1
Adapter cover by pushing
in the grips and sliding off
the cover in the indicated
direction.
Insert the Wireless LAN
2
Adapter in the socket.
Put the Wireless LAN
3
Adapter in the correct
position until it clicks and
close the cover.
Install the Battery
Lift the stand.
1 2
Put the right side of the battery under
4 5
the provided hook.
Touchstrip
Use the buttons on
this touchstrip to
access a layout.
Power Button
Scroll Wheel
By pressing and
holding this scroll
wheel for 5 seconds
you enter the
System Settings.
Open the battery cover by pushing the grips Attach
3
and sliding off the cover in the indicated provided socket.
direction.
Push the left side of the battery down into its place.
Close the battery cover.
Getting Started Guide
By tapping button 8
on the touchstrip
you enter the
iPronto Portal.
Status Display
Recharge the Battery
the battery connector to the
Note
It is best to fully recharge the battery.
The iPronto can be used when it is recharging.
View Control button
With the View Control button
you enter the Application
Settings.
Speaker
Remote Control buttons