Operating The Appliance; Preparing The Washing Machine; Switching On The Appliance/ Selecting A Programme; Change The Programme Default Settings - Bosch WAT28620AU Instruction Manual And Installation Instructions

Operating the appliance

en
1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 12
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons i programme set at the
factory is then always displayed.
The current settings and programme
information light up at full brightness
and the A symbol flashes.
The settings that can be selected light
up at half brightness.
Notes
Temporary flashing of the Û symbol
■
shows you should run the Drum
Clean Û programme or any other
programme soon at a washing
temperature of at least 60 °C.
If the E 3 sec. symbol flashes, the
■
childproof lock is active.
You must deactivate this before you
can change settings or start the
programme. ~ Page 34
32
In appliances with drum interior
lighting:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting a programme.
The light switches off automatically.
You can:
Use this programme and load
■
laundry. ~ Page 33
Or select another programme.
■
Overview of programmes
~ Page 26
Or change the programme default
■
settings. ~ Page 32
And/or select additional programme
■
settings. ~ Page 32
Change the programme
default settings
To change the current settings, touch
the button you require on the control
panel and the relevant indicator will
switch to full brightness.
You can change ready in // (Ready in) /
/ Finished in by touching N or M.
Programme default settings
~ Page 29
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
To do this, touch the required control
panel; the relevant display switches to
full brightness.
Additional programme settings
~ Page 30