Hitachi C40L3 Owner's Manual page 21

Convenience functions
Icon Selected Items
Advanced settings
RGB mode
Off / Red Only /
Green Only / Blue
Only
Game mode
Off / On
MPEG NR
Off / Low / Middle
/ High
Noise reduction
Off / Low / Middle /
High / Auto
Film mode
Off / On
HDMI mode
Auto/Video/Graphi
Piture freeze
Off / On
Picture reset
Sound
Sound preset
Standard / Music / Movie /
Voice / Stadium Personal
100Hz
500Hz
1.5KHz
5KHz
10KHz
Balance
Auto volume control
Off / On
SPDIF type
Off / Auto / PCM
SPDIF delay
TV placement
Desk top / Wall mount
Advanced settings
Audio language
Volume
Off / On
Speaker volume
It is able to receive the SMPTE color bar by R/G/B single color
mode for fine-tune of Tint and Saturation.
Select Game mode.
Automatically reduces mosquito noise in the picture without degrad-
ing picture quality.
Set the level of decreasing noise included in the video signal.
Select film mode signal (24Hz => 60Hz) process.
Select Video mode for general use (i.e. with a STB, BD Player, DVD
Player, or Game Console). Select Graphic mode for use with a PC.
Select picture freeze setting.
Restore all picture settings to default.
You can choose a basic sound mode to your preference.
The setting of this item adjusts the audio level of the selected
frequency.
Adjust the left and right sound channel volume.
Volume level is adjusted automatically to lower volume of loud
scenes and to raise volume of quieter scenes.
Select the format for your digital audio output If you have connected
an amplifier / Raw / PCM receiver to the digital audio jack on your
TV.
Set SPDIF delay time.
Select TV placment.
When two or more audio languages are included in a digital signal,
you can select one of the audio languages. (This function is availa-
ble only for digital broadcasts.)
Select speaker out.
Set volume level.
Setup hint
(continued)
EN 21