Button Functions - Philips SRU5040/55 Owner's Manual

Button Functions

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
32
Button Functions, cont.
1. Red Indicator: Lights when any button is pressed.
2. SETUP: Used for setup.
23.
3. TV, VCR, DVD, SAT/CBL: Selects product to be
operated.
22. 4. ENTER: Used after direct channel number entry to
immediately change to the selected channel.
5. MENU: Brings up the DVD disc Menu screen - use
21.
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
20.
6. GUIDE: Displays on-screen program guide.
7. VOLUME UP/DOWN: Changes the volume level of
19.
the product, normally the TV.
8. PIP: TV Picture-in- Picture control.
18. 9. PREV. CHAN: Returns to the previously selected
channel, or DVD repeat toggle. REPEAT: performs
DVD players "A-B Repeat" (or RPT A.B) function
17.
for repeat play of current Chapter or Track.
10. CC (SUBTITLE): TV Closed Caption (if your TV
16.
has this feature) or DVD Subtitle toggle.
11. CHAPTER +/-: controls DVD/CD track selection i.e.
15. DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD
when in DVD Mode.
14.
12. RECORD, PLAY, STOP, REW, FF, PAUSE: VCR
control buttons operate your VCR even when the
13.
remote is set to operate the TV. Also operates DVD
Scan -/+.
13. SLEEP: Turns off the TV after a period of 1 to 99
minutes.
14. MUTE: Turns off the TV sound while the picture
remains.
15. TOGGLE: Swaps TV PIP screens.
16. UP, DOWN, LEFT & RIGHT: Navigation buttons.
17. OK: Selects menu items for the device you are
controlling.
18. CHANNEL UP/DOWN: Changes the channels.
19. QUIT: Used to exit menu functions.
20. INFO/SELECT: Displays/selects on-screen channel
information, etc.
21. TV/VCR/INPUT: For some TVs, press repeatedly to
select from available viewing sources (antenna,
cable box, VCR, etc.).
22. NUMBERS: Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
23. POWER: Turns product On or Off.
33