Agc; Auto Level - Triax TMB 200S Manual

Programmable Multiband Amplifier
TMB 200 & TMB 200S

AGC

p
AGC
Menu
p
Auto

Auto Level

Menu
117
p

Unit in standby mode, push a button to reach the SETTINGS/Config menu.

Press the  button until the display shows the AGC menu.

Press Menu button to enter the function

Press the buttons + or - to select on or off

Confirm by pressing Menu
IMPORTANT!

AGC: The unit memorizes the average output level. A variation of ± 1 dB triggers the function
and compensates the variation within gain and attenuation limits

AGC mode hides all other menus. To modify the parameters, switch the AGC mode to OFF
Auto level

Unit in standby mode, push a button to reach the SETTINGS/Config menu.

Press the  button until the display shows the Auto menu.

Press Menu button to enter the function

Press the buttons + or - to select the output level value

Confirm by pressing Menu
IMPORTANT!

The unit memorizes the selected output level, the function try to reach the value within input,
gain and attenuation limits.
Note: Setting of VHF level is not automatic.
awi -july 14
+
AGC
AGC
-
OFF
ON
Error code
+
AUTO lvl
Menu
-
117
16
Menu
Wait
.
TMB 200-V1