User Maintenance For The Shaving Foils - Easy@Home 9113973 User Manual

USA
Cleaning and maintenance
10. Switch the shaver back off.
11. Use the cleaning brush
er blades and the entire top part of the shaver (see fig. A and I).
12. Thoroughly rinse off the top part of the shaver and the shaver blades under
warm running water (see fig. H).
13. Use the On/Off switch to switch the shaver off without the shaver head for
approx. 5 – 10 seconds in order to dispel water drops from the shaver blades
4
.
14. Use a lint-free cloth or a paper towel to thoroughly dry off the shaver.
15. Firmly mount the shaver head
nism locks into place (see fig. F).
16. Place the protective cap
The shaver is now ready for use again.

User maintenance for the shaving foils

To maintain the performance of your shaver and increase the service life of the
shaving foils, you should perform user maintenance on the shaving foils every
two months as follows:
1. Put a drop of fine, non-resinous household oil on the tip of your finger.
2. Distribute the oil evenly on the shaving foils.
3. Without applying pressure, dab the shaving foils with a soft, lint-free cloth
or paper towel.
Replacing wearable parts
Ordering wearable parts able parts ble parts
You can order a new shaving foil unit and shaver blades to replace worn ones. new shavin new shavin
You can choose between three packages: between etween
• Shaving foil unit consisting of two shaving foils and the integrated trimmer
• Two shaver blades as a set
• Set consisting of a shaving foil unit and two shaver blades
To place your order, contact the address provided on the order form.
18
USA
+1 877 386 8264
7
to completely remove all stubbles from the shav-
2
on the shaver so that the locking mecha-
1
on the shaver.
nd increase the se
ntenance on the sh
ousehold oil on th ehold oil on th
shaving foils. aving foils
dab the shavi dab the shaving f
ble ble p art arts
g foils oils
ncrease the
nance on th
AFTER SALES SUPPORT
TM3Service@outlook.com