Using The Trimmer; Using The Travel Guard - Easy@Home 9113973 User Manual

Using the trimmer

NOTICE!
Keep in mind that the trimmer always generates a straight cut-
ting edge. If you do not want a straight cutting edge, you must
hold the shaver at an angle.
For hard-to-reach areas or for very precise cuts, use a comb to
check the hair you intend to trim with the trimmer and the cut
length.
Use the trimmer as follows:
1. Move the trimmer
(see fig. D).
2. Use the On/Off switch
3. Slowly guide the trimmer up to the hair you intend to cut.
Always use short strokes to cut your hair.
4. Turn the shaver off.
5. Clean the shaver as described in the chapter "Daily cleaning after a wet
shave" or "Daily cleaning after a dry shave".

Using the travel guard

The shaver is equipped with a travel guard that prevents the shaver from acci-
dentally activating.
Activating the travel guard
− Hold the On/Off switch witch witch
shaver will automatically deactivate and the battery symbol will flash four tomatically tomatically
times in green. een. een.
The travel guard is now active. uard is n uard is now
Deactivating the travel guard
NOTICE!
Connecting the shaver with the power supply unit and inserting
the power supply unit in a socket will automatically deactivate
the travel guard.
1. Hold the On/Off switch
The battery symbol will flash twice in green in the process.
The shaver will now automatically switch on.
2. Briefly push the On/Off switch to turn off the shaver.
The travel guard is now deactivated.
AFTER SALES SUPPORT
USA
+1 877 386 8264
14
all the way out until it audibly locks into place
5
to turn the shaver on (see fig. A).
chapter "Daily cle apter "Daily
ry shave". y shave".
rd
a travel guard a travel guard tha
ve vel uard uar
5
down for approx. 4 seconds (see fig. A). The ow
5
down for approx. 4 seconds (see fig. A).
see fig. A ig. A). ).
tend to cut. tend to cut.
TM3Service@outlook.com
USA
Handling g
15