Cleaning And Maintenance; Daily Cleaning After A Dry Shave - Easy@Home 9113973 User Manual

USA

Cleaning and maintenance

Cleaning and maintenance
NOTICE!
Risk of short circuit!
Water that has penetrated the power cord or the
power supply unit may cause a short circuit.
− Never immerse the power supply unit or the 5 V
plug in water.
NOTICE!
Risk due to improper operation!
Improper handling of the shaver may result in damage.
− Do not use any aggressive cleaners, brushes
with metal or nylon bristles, sharp or metallic
cleaning utensils such as knives, hard scrapers
and the like. They could damage the surfaces,
the shaving foil and the shaver blades.

Daily cleaning after a dry shave

1. Before cleaning, pull the 5 V plug
2. Use the On/Off switch
3. Hold the shaver over the sink.
4. Depress both release buttons ease button ase button
5. Pull the shaver head up and off. er head up a r head up a
6. Knock the shaver head out gently over a sink to remove stubbles. ver hea r hea
7. Without the shaver head mounted, use the On/Off switch
shaver on for approx. 5 – 10 seconds to dispel any stubble from the shaver
3
blades .
8. Firmly mount the shaver head on the shaver until the locking mechanism
audibly engages (see fig. F).
9. Place the protective cap
The shaver is now ready for use again.
16
USA
+1 877 386 8264
as knives, hard
uld damage th uld damage
d the shaver b the shaver
a dry shave a dry shave
8
V plug V plug out o o out of the shaver (see fig. A and B).
5
t t to turn off the shaver. urn o urn off th
the sink. the sin
4
to release the shaver head
1
on the shaver.
ay result in da esult in
eaners, brushe aners, brus
es, sharp or me sharp or
knives, ha
2
5
to switch the
AFTER SALES SUPPORT
TM3Service@outlook.com
(see fig. E).