Kind Technical We thank you for choosing the appliance. We can assure you its perfor- mance will be long lasting, reliable when it is installed and used properly (manufacturer’s guidelines are followed). Good work and thanks The Manufacturer. WARRANTY Our appliances are covered by a SPECIFIC WARRANTY starting on the date of validation by the Authorised After-Sales Service of your area, whose address you can find on our website or by directly contacting the manufacturer.
Page 4
INDEX GENERAL General information Fundamental safety rules Description of the appliance Identification Structure Technical data Accessories Wiring diagram Control panel INSTALLATOR Receipt of product - Dimensions and weights Installation - Positioning the appliance - Wall exhaust - Roof exhaust - Types of installation - Fitting the appliance - GP / SDP grilles and pipe KIT - Pipe fitting: case A, B and C...
GENERAL INFORMATIONS After removing the packaging, check the integrity In case of damage or loss, ask the Technical and completeness of the supply and in case of any Assistance Service of your Area Manufacturer for discrepancies, contact the Agency that sold the another copy.
APPLIANCE DESCRIPTION Independent gas appliances for heating environ- The appliances are factory set, to operate ments. with Natural Gas, but are also available for They feature an atmospheric burner with combustion LPG (G30/G31). chamber TYPE C12 – C32 – C52 – C62, sealed with This type of appliance can be transformed from respect to the installation premises, utmost guaran- Natural Gas to LPG and vice versa.
Page 7
STRUCTURE 1 - hot-air outlet 20 - environment probe 2 - frame 21 - pressure switch 1 3 - heat exchanger 22 - control unit 4 - detection and ignition electrodes 23 - gas inlet pipe 5 - burner unit 24 - pressure switch 1 pressure point 6 - door with glass 25 - combustion air pipe...
CONTROL PANEL - GREEN Led On = heater On - GREEN Led Off = heater Off - RED Led On = burner flame block - RED Led Off = heater released - RED Led SLOW flashing = pressure switch don’t switch ON - RED Led FAST flashing = locked pressure switch - MIN / MAX flame intensity knob - GREEN Led On = Wireless control panel activated...
Need help?
Do you have a question about the IF08A3 and is the answer not in the manual?
Questions and answers