Advertisement
Operation
Operating the Work Lights
Press button number 1 on the main display screen to turn the
work lights on or off (Figure 12).
Figure 12
Work Lights Shown in the On Position on the Screen
1. Button number 1
Maintenance
Replacing a Work Light Bulb
1. Turn the knob on the rear of work light
counterclockwise 1/4 turn, and pull the light-bulb
assembly out (Figure 13).
Figure 13
1. Light-bulb assembly
2. Insert the new light-bulb assembly at the horizontal
position, and turn the knob clockwise 1/4 turn back to
the original, vertical position (Figure 14).
Important: Do not touch the light bulb during
assembly, as this will shorten the life of the light
bulb.
1. Light-bulb assembly
4
Figure 14
Advertisement
