Advertisement
1. Rear ROPS light-cover
plate
Installing the Work Lights
1. Remove the 4 hex-head screws and the 2 cover plates
from the front ROPS light-cover plate (Figure 8).
Note: Discard the 4 hex-head screws and the 2 cover
plates.
1. Hex-head screw
2. Connect the 2-pin connector into the 2-socket
connector, and install the 2 front work lights into the
front ROPS light-cover plate (Figure 9).
1. Work lights
2. Front ROPS light-cover
plate
Figure 7
2. 2-socket connectors
Figure 8
2. Cover plate
Figure 9
3. 2-socket connectors
3. Remove the 4 hex-head screws and the 2 cover plates
from the rear ROPS light-cover plate (Figure 10).
Note: Discard the 4 hex-head screws and the 2 cover
plates.
1. Cover plate
4. Connect the 2-pin connector into the 2-socket
connector, and install the 2 rear work lights into the
rear ROPS light-cover plate (Figure 11).
1. Rear ROPS light-cover
plate
2. 2-socket connectors
3
Figure 10
2. Hex-head screw
Figure 11
3. Work lights
Advertisement
