HIKVISION DS-2CC5181PN-VF User Manual page 20

Day/Night High-definition Dome Camera·User Manual
12. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
13. Three-axis adjustment.
1). View the camera image using the monitor.
2). Rotate the panning table to adjust the panning position of
the camera. The adjusting range is from 0 degree to 355
degrees.
3). Loosen the tilting lock screw.
4). Rotate the tilting table to adjust the tilting position of the
camera. The adjusting range is from 0 degree to 80
degrees.
5). Tighten the tilting lock screw.
6). Rotate the lens to adjust the azimuth angle of the image.
14. Zoom and focus adjustment.
1). View the camera image using the monitor.
Figure 2-5 Lens Adjustment
8
Tilting Lock
Screw
Panning Table