HIKVISION DS-2CC5181PN-VF User Manual page 10

Day/Night High-definition Dome Camera·User Manual
the Limited Power Source with AC 24V or DC 12V according to

the IEC60950-1 standard.
Please refer to technical specifications for detailed information.

Input voltage should meet both the SELV(Safety Extra Low

Voltage) and the Limited Power Source with AC 24V or DC 12V
according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.
Do not connect several devices to one power adapter as

adapter overload may cause over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the

power socket.
When the product is mounted on wall or ceiling, the device

shall be firmly fixed.
If smoke, odor or noise rise from the device, turn off the power

at once and unplug the power cable, and then please contact
the service center.
If the product does not work properly, please contact your

dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
Make sure the power supply voltage is correct before using the

camera.
9