Correct Mounting; Food Storage - Goddess RCC0140GW8 Instruction Manual

EnG

CoRRECT moUnTinG

Please choose a free room with flat surface, which can support a refrigerator.
The gap between the refrigerator and wall is about 5 to 10cm, and that between the top cover
and ceiling is above 30 cm. To keep from direct sunlight and out of places at high temperature
To keep from humidity for possible mechanical breakdowns and rust. Unsteady surface lead
to much noise and mechanical quivers. If the refrigerator is placed on the carpet, a flat panel
should be inserted to avoid its color changes and to help heat radiation.To mount well,
its adjustable feet are next to the floor and the refrigerator.Stands backward slightly for your
convenience of door closing.
1. When using, please take away foaming tray.
2. If the refrigerator has little unsteady, you can turn the adjusting sheet to adjust
the refrigerator plane (turning left is driving up). Below adjusting sheet has adjusting hole,
use simple tool can adjust it (refer to right fig).

Food SToRaGE

There should be spare room left because tight food piles will reduce
refrigerating effect. Please put watery food in plastics package before place it
in the cabinet to avoid odor changes and water losses.
To save energy please cool hot food before place it in the refrigerator.
To save energy please reduces door openings.
Warning – Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer .
Do not place water container and heavy objects on the top, otherwise
water will penetrate into electric parts. It is not permitted to store articles
with high demands for temperature, such as serums, vaccines and academic
documentation. Before using, please take away foaming trays.
ENG - 20