Renfert Bijou 90 Series Instruction Manual
Laboratory burner
Hide thumbs
Also See for Bijou 90 Series:
- Instruction manual (64 pages) ,
- Manual (63 pages) ,
- Faq (15 pages)
Advertisement
Quick Links
Bijou 90
No. 960-0000 F / 961-0000 N (H) / 961-0001 N (L)
Bedienungsanleitung
Instruction manuel • Manuel de service
Modo d´impiego • Instrucciones para el servicio
Handleiding
Renfert GmbH • Industriegebiet • 78247 Hilzingen
Germany • Tel. +49 7731 8208-0 • Fax +49 7731 8208-70
info@renfert.com • www.renfert.com
Made in Germany
Advertisement
Related Manuals for Renfert Bijou 90 Series
Summary of Contents for Renfert Bijou 90 Series
- Page 1 No. 960-0000 F / 961-0000 N (H) / 961-0001 N (L) Bedienungsanleitung Instruction manuel • Manuel de service Modo d´impiego • Instrucciones para el servicio Handleiding Renfert GmbH • Industriegebiet • 78247 Hilzingen Germany • Tel. +49 7731 8208-0 • Fax +49 7731 8208-70 info@renfert.com • www.renfert.com Made in Germany...
- Page 2 No. 960-0000 F / 961-0000 N (H) / 961-0001 N (L) ENGLISH 2. Installation / You have purchased a brand product from Renfert. To ensure that you Operation enjoy using this product for many years, please follow these instruc- The burner may only be installed by tions carefully.
-
Page 3: Exclusion Of Liability
• Always observe the accident prevention regulations of the relevant employer's liability insurers. 3.1 Exclusion of liability Renfert GmbH rejects any claims for compensation as well as warranty claims in case of: • the product is used for any other purpose than those mentioned in the instruction manual •... - Page 4 The ignition flame should be as stable, and therefore as smooth, as possible in order to ensure reliable burner operation. Adjust Position A: the flame so that it cannot be Ignition or pilot flame burns extinguished unintentionally. Position B: 4.3 Adjusting the burner Main flame and ignition flame burn position Position C:...
-
Page 5: Troubleshooting Guide
5. Troubleshooting Guide Fault Cause Remedy If the burner will not • • Central gas supply Operational error. light in spite of the has not been turned gas shutoff valve on / gas bottle is being open and no empty. gas is heard escaping. - Page 6 If the burner nozzle becomes melt the wax plug and allow the molten wax to completely run plugged, disassemble the out. tubes than hold the burner with the nozzle facing down. If this method fails to clean the Use a hair dryer or other nozzle, it must be either cleaned device genera-ting hot air, or replaced by an authorized...
-
Page 7: Spare Parts
Output 660 W comply with regulations. When used Mode of Continous operation operation properly Renfert guarantees all parts of the Bijou 90 for 3 years. Parts Ambient tempera- max. 40ºC (104ºF) given to natural wear and tear are ture excluded from this guarantee.