Important Information - Philips SDV2940/55 User Manual

Safety Instructions
IMPORTANT
READ
BEFORE
INSTALLATION

Important Information

antenna
power
injector
module
splitter
(not included)
or
amplifier
tv
or
video
device
Do NOT work on a wet, snowy or windy day or if a thunderstorm
is approaching. Do NOT use a metal ladder.
If the antenna assembly starts to fall, get away from it and let it
fall. Remember that the antenna mast and cable are all excellent
conductors of electrical current.
Do NOT install the antenna by yourself. Be sure that there are two
other people available for help.
If any part of the antenna should come in contact with a power line
. . . DON'T TOUCH IT OR TRY TO REMOVE IT YOURSELF. Call
your local power company immediately. They will remove it.
Should an electrical accident occur . . . DON'T TOUCH THE
PERSON IN CONTACT WITH THE POWER LINE, or you too
can become electrocuted. Instead, use a DRY board, stick, or
rope to push or pull the victim away from the power lines and
antenna. Once clear, check the victim. If he has stopped breathing,
immediately administer cardiopulmonary resuscitation (CPR) and
stay with him. Have someone else call for medical help.
Install wire antennas high enough that they will not be "walked into"
by people.
Do not install antenna wire(s) over or under utility lines.
Important installation information
The SDV2940 uses a power injection module to power the antenna
amplifier.
It is essential for proper operation of this antenna system that the
amplifier be connected between the antenna and any devices such
as splitters, matching transformers, networks, etc.
SEE DIAGRAM TO LEFT.
Disregarding this important notice may result in damaging the
power injector or improper operation / poor performance.
EN
19