Volkswagen SDI 1.9L Series Manual page 60

Section 5 - Maintenance
4. Pump the fluid from the housing into a suitable container. Dispose of the fluid properly.
a
5. Remove and discard the filter element and the O‑rings.
6. Coat the new O‑rings with transmission fluid.
7. Install the new O‑rings and filter element.
b
a
Improper installation of the transmission fluid filter assembly may cause the fluid to foam or leak out, resulting in decreased
efficiency and damage to the transmission. Properly seat the transmission fluid filter during installation.
8. Install the fluid filter assembly in the transmission cavity by turning clockwise and pushing at the same time.
9. Using a 6 mm Allen wrench, turn the filter assembly nut clockwise to tighten. Tighten the nut to the specified torque.
b
Description
Filter assembly nut
10. Fill the transmission to the proper level with the specified fluid. See Add Fluid.
Page 52
a - Suction pipe
b - Suction pump
b
13165
NOTICE
13173
c
b
a
13167
a - Assembly nut
b - Fluid filter assembly
a
90-8M0070920
a - Filter element
b - Cover
c - O‑rings
Nm lb–in.
7 62
AUGUST 2012
eng
lb–ft
–