Panasonic SR-PX104 Operating Instructions Manual page 16

What to do when...
If the suggestions on P.28–29 do not bring about any
O
improvement, you can change the settings.
Steps 2, 3 and 4 must each be completed within 16 seconds.
O
When no operation is performed for 16 seconds, the display
returns to the current time. (Setting cannot be made.)
 Please restart the procedure.
O After the setting is completed, the display returns to the current time.
To go back to the previous setting, follow the procedure again.
O
If you want to change the keep warm temperature.
1
Press twice
Press and select "Quick"
Flashing
OSelect "Quick" under "White Rice".
2
Press You will not hear a beep.
Press You will not hear a beep.
Press
3
Press
OThe default setting is "74".
30
(74→76→72)
4
When it smells
Press
Set to "76".
After 10 seconds
(  S ettingendsautomatically.)
When colour has changed or it is dry
Press
Set to "72".
After 10 seconds
(  S ettingendsautomatically.)
If burning is a concern.
1
Press twice
Press and select "Quick"
Flashing
OSelect "Quick" under "White Rice".
2
Press You will not hear a beep.
Press You will not hear a beep.
Press
3
Press
Select "02".
Press
4
Press
Set to "So:Lo".
After 10 seconds
(  S ettingendsautomatically.)
To stop the buzzer sounding (end sound)
during cooking, reheating and cleaning.
1
Press twice
Press and select "Quick"
Flashing
OSelect "Quick" under "White Rice".
2
Press and hold down
(for approximately 5 seconds)
O This change does not switch off the button sounds.
31