Advertisement
Quick Links
1
EPI3T
HINGE REPLACEMENT INSTRUCTIONS
WARNING
!
!
ENSURE THE UNIT IS COMPLETELY COOL BEFORE STARTING INSTALLATION.
SPECIAL TOOLS YOU WILL NEED:
T20 TORX SCREWDRIVER
FLAT HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
3/32 HEX KEY
DOOR HINGE REPLACEMENT
1
2
TO REMOVE THE DOOR, REMOVE THE 3 SCREWS
LIFT THE DOOR OFF THE APPLIANCE. LAY THE
FROM THE TOP HINGE AND 2 SCREWS FROM THE
DOOR ON A SOFT NON-ABRASIVE SURFACE.
BOTTOM HINGE, MOUNTED TO THE APPLIANCE.
3
4
HINGE
HINGE
BLOCK
BLOCK
ASSEMBLY
ASSEMBLY
HINGE PIN
SET SCREW
SET SCREW
DOOR
HINGE
STOP
PIN
ASSEMBLE PARTS TOGETHER, THEN INSTALL TO THE
REMOVE THE SCREWS AND HINGES FROM THE DOOR.
DOOR, AS SHOWN IN STEP 3.
REMOVE HINGE PINS AND SET SCREWS AND RETAIN.
DISCARD MOUNTING SCREWS AND HINGES.
W415-1449 / 03.03.15
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
• (705)721-1212
• fax (705)722-6031
• www.napoleonfireplaces.com
Advertisement
Related Manuals for Napoleon EPI3T
Summary of Contents for Napoleon EPI3T
- Page 1 DOOR, AS SHOWN IN STEP 3. REMOVE HINGE PINS AND SET SCREWS AND RETAIN. DISCARD MOUNTING SCREWS AND HINGES. W415-1449 / 03.03.15 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • (705)721-1212 • fax (705)722-6031 • www.napoleonfireplaces.com...
- Page 2 REPLACE THE SCREWS AND BOTTOM HINGE BLOCK ON REPLACE WITH THE SCREWS AND HINGE BLOCKS THE APPLIANCE. INSERT THE HINGE PIN AND INSTALL THE PROVIDED. RE-INSTALL THE HINGE BLOCK ASSEMBLY. SET SCREW LOOSELY. RE-INSTALL THE SET SCREW LOOSELY. HINGE PIN SET SCREW TO ALIGN THE DOOR, LOOSEN THE SET SCREWS.
- Page 3 À LA PORTE, COMME ILLUSTRÉ À L’ÉTAPE 3. ENLEVER LA CHARNIÈRE ET VIS DE RÉGLÉ ET METTRE DE CÔTÉ. JETTEZ LE VIS ET CHARNIÈRE. W415-1449 / 03.03.15 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • (705)721-1212 • fax (705)722-6031 • www.napoleonfireplaces.com...
- Page 4 REMPLACER AVEC LES VIS ET BLOC DE CHARNIÉRE REMPLACER LE VIS ET BLOC DE CHARNIÉRE FOURNI. RÉINSTALLER LE ENSEMBLE DE BLOC INFÉRIEURE SUR L’APPAREIL. INSÉREZ LE DE CHARNIÉRE. RÉINSTALLER LE VIS DE RÉGLÉ CHARNIÉRE ET RÉINSTALLER LE VIS DE RÉGLÉ LÂCHEMENT.