Mount On The Wall; Set Up A Digital Tuner With This Antenna - Philips SDV7220/12 User Manual

Mount on the wall

1
Mount two wood screws into the wall with
80mm (3.149") of center distance.
2
Plug the plastic bracket into two notches
on the rear housing, then push it up to
lock in.
a
3
Attach the plastic bracket to the wood
screws on the wall.
a
4
Slide the gain control switch of the
amplifier towards the max. position.
EN
8
b
b
Tip
•
It is possible to slide the gain control switch towards
the min. position or remove the amplifier for best
reception.
Set up a digital tuner with this
antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
• Connect the antenna to a digital tuner.
If the signal strength is good enough, the
channels can be memorized in the tuner
automatically .
• Connect the antenna directly to the TV.
Tune to the analogue channels and find
the best antenna location. Then re-connect
the antenna to the digital tuner. Ensure the
signal strength is good enough before you
install the channels with the tuner.